Izdelki za jeklena jekla (116)

Straight Steel Extension Tubes 1/8” BSP Male both ends SRT6 Straight Steel Tube :6” (150mm)

Profiled Steel Wire Flue Brush

Steel table base, made to order, custom made, powder coated

Small Steel Wire Refill Sections

Steel table base, made to order, custom made, powder coated

Cranked Steel Extension Tubes 1/8” BSP Male both ends Cranked Steel Tube 10” (250mm) Part No. BRT10

Stainless Band has in house rolling facilities to produce temper rolled strip in various hardness or tensile to suit client requirements. Stainless Band Ltd has in-house rolling facilities to flatten and produce temper rolled stainless steel strip to suit client requirements. These are available in various hardness or tensiles to reduce cross camber or “D” Section. For higher tensile over 1000n/mm2 (330vpn) we can supply precision mill material. Our production capacity for stainless band temper rolled strip is 0.10mm up to 2.0mm with a hardness range of 0.1mm up to 2.0mm with VPN ranges TR 230, TR 280, TR330, TR380 and TR430 and tensile ranges of 800+ 1000+ 1200+ 1500+ and 1900+ n/mm2. Stock grades are 430, 301, 304 and 316. Our production capacity for stainless band flattening provides a gauge range: 1.00mm up to 3.0mm, with a width range: from 10mm to 110mm, stock grades: 430, 301, 304 and 316

Hand Wire Brushes_Steel Wire Brushes327

Aluminium extruded holder is available to suit 5mm 8mm & 10mm brush strip. It is available in 45 degrees, 90 degrees, and 180degrees to suit the brush strips application. Other types of holder are available on request. Bespoke products are also availablefor high end finishes and requirements. Call us to discuss your needs. Our professional & expert staff will always be able to help wherever possible.

Steel hand brushes are available in a wide variety of configurations to suit the application its required for. We offer several type of steel wire: Mild steel, High tensile steel, Specialist steels, Stainless steel and Steel Alloys. All are available in the following formats: straight, crimped or flat wire. Consideration for the application is paramount when selecting the correct wire brush for your purpose. It can often seem confusing with so many configurations and specifications to bear in mind, so do let us help you with our extensive knowledge, it may save you time and money in the long run. Wire brushes are designed primarily for the removal of detritus, swarf, burrs and sharp edges. Wire brushes are also essential for surface preparation or finishing, including steel, aluminium, timber and glass and can be used in most environments.

Flat wire has a unique scraping action when incorporated into many configurations of brushes. A highly agressive material that removes detritus quickly.

At Stainless Band we have the capacity to polish material in coil form or blanks in various grades including AISI 304-S15- 1.4301 EN 10088-2/ASTM A240. We can offer the following finishes from 120 to 320 Grit as well as standard 2B or BA finished. Material can be made into blanks with lengths from 100mm to 3000mm long. Standard thicknesses 0.10ms from m - 4.00. and widths from 2.50mm to 1500mm maximum. Our standard tolerance is EN ISO 9445:2006 but others are available. We can provide coating films, PE and PVC surface protection. Finishes can range from smooth and slightly reflective through course, medium, fine and bright and reflective.

Hand Wire Brushes_Flat Steel Wire Brushes315

Profiled Steel Wire Brushes

Hand Wire Brushes_Flat Steel Wire Brushes316

Our stainless steel filaments are available in Grades 316 & 304, in many diameters and crimp.....

Stainless Steel Spindle End Brushes

Precision strip used in the manufacture of spiral wound gaskets and other processes such as pressings. Our Bobbin wound material is extensively used in the gasket sealing industry. Bobbins can be up to 15kgs and speed up the change overs and reduce scrap loss. Our spiral wound gasket production facilitates thicknesses of 0.20mm, 0.18mm, 015mm and 0.10mm. Widths come as standard in 5.33mm, 5.0mm, 4,75mm with a minimum width of 2.50mm. The minimum order for our bobbin wound products is 20k depending on the grade ordered. All of our spiral wound gaskets can be supplied on plastic ribbon or pancake coils. Our inner ring production sizes come in 3.00mm, 4.00mm and 5.00mm thicknesses and widths of 6.50mm wide to 100mm wide. Our minimum orders for inner ring production is 50kg depending on the grade. Material can be supplied as coil or in lengths of a maximum 3 metre.

A specialist product made from crimped (wavy) stainless steel wire with a stainless steel backing strip and stainless steel retention wire. This product is available in 5mm, 8mm & 10mm stainless steel backing strip with filament lengths up to 250mm in fine stainless steel or 500mm in medium or coarse stainless steel. 3mtr lengths only. Aluminium or stainless steel holders are available.

Hand Wire Brushes_Steel Wire Brushes328

Crimped Steel Wire Brushes

Hand Wire Brushes_Steel Wire Brushes321

Single Row Steel Wire Brushes

Steel and Abrasive Cup Brushes

Long Trim Steel Wire Strip Brush

Hand Wire Brushes_Steel Wire Brushes320

Crimped Steel Wire Rotary Brush

Steel Wire Brushes

Specialist Steel End Brushes

Inverted Coil Brushes are available in a variety of colours and material types. Internal and external diameters to suit